|
Arti
Home
ICD CONVENTIONAL DRYER TYPE
MAC Electric Dryer Type
Arti
Home
|
| No request is too small or too big.
InComac
standard line of MAC 6G Drying Systems will satisfy most needs. However,
special needs are always met as a challenge and are usually satisfied
through slight modifications. |
SMALL CAPACITY KILNS
| MOD |
MAC 6/6G |
Capacity |
3/5 m³ (1200 to 2100 bf) |
| MOD |
MAC
10/6G |
Capacity |
8/10 m³ (3400 to 4200 bf) |
| MOD |
MAC
15/6G |
Capacity |
12/15 m³ (5100 - 6400 bf) |
AVERAGE CAPACITY KILNS
| MOD |
MAC
25/6G |
Capacity |
20/25 m³ (10,000 bf) |
| MOD |
MAC
35/6G |
Capacity |
30/35 m³ (15,000 bf) |
| MOD |
MAC
50/6G |
Capacity |
50/55 m³ (20,000 bf) |
LARGE CAPACITY KILNS
| MOD |
MAC
70/6G |
Capacity |
CAPACITY 70 m³ (30,000 bf) |
| MOD |
MAC
100/6G |
Capacity |
CAPACITY 100 m³ (42,000 bf) |
| MOD |
MAC
140/6G |
Capacity |
CAPACITY 130 m³ ( 55,000 bf) |
| MOD |
MAC
200/6G |
Capacity |
CAPACITY 160 m³ (68,000 bf) |
| High
Efficiency Energy is what MAC 6G is about.
The InComac
Model MAC 6G Heat Pump Drying System provides a considerable energy
savings while still producing optimal efficiency. Many heat pump systems
reduce the humidity by the cooling process but do not effectively use the
ability to heat as well as cool. The unique design of the InComac
dehumidification kilns, use all the energy to its fullest. The Cold side
of the system is used to extract the moisture from the air inside the kiln
by condensation. The heat generated by the gas expanding from the
condensing process is routed to another coil and the air from the kiln is
circulated over it to extract the heat and re-enter the kiln. It doesn't
get any better than this. |
|
The main components of the MAC 5/G Heat Pump Drying Systems
are composed of the following:
- COMPRESSOR
- CONDENSER
- EVAPORATOR
DEHUMIDIFIER
- MAIN
FAN
- AUXILIARY
HEATING ELEMENT
- OUTSIDE
AIR INTAKE DAMPERS
- DRYING
CHAMBER
- WET AIR
EJECTION DAMPERS
- INDUCTION
- CHAMBER
CIRCULATING FANS
|
|
Click Here for an Incomac Specific Quote
|
